SmartCom

SmartCom

2N® SmartCom is an intelligent device that allows you to communicate and monitor your assets.  Just connect it to an asset, set the IP address for data delivery, and you can begin. 2N® SmartCom uses GPRS technology for data transfer, and you can connect it to pretty much anything with the same interface, such as meters, vending machines, elevators, etc. without the need to install any drivers, software/firmware or anything else.

Акценти на продукта:

2N® SmartCom is a universal tool for pretty much any meter, allowing the sending of consumption data remotely to the data centre where it can be used for further optimisation of processes and services.

Device specifications:

Interface

• RS232 + RS485
• RS232 + M-Bus
• 2x relay output
• 2x analog/digital input

GSM/GPRS

• Frequency band
  GSM 850/900/1800/1900 MHz
• GSM Modul
  Sierra Wireless WISMO288
• SIM card
  3V/1.8V
• GPRS Class 10
• Receiver reference sensitivity
  -108 dBm
• Transmitter output power
  GSM 900/1800 - max 33/30 dBm (+/- 2dB)

Interface RS232

• D-sub 9 pin male (female optional)
• 300-115200 baud

Interface RS485/M-Bus

• Optional
• 6-pin RJ12 connector

Power supply

• DC Power supply
  12V
• Mains supply
  Adapter 100-240V/50-60Hz to 12V/0.5A
• Consumption
  Max. 3W

Input/Output

• Relay
  Max. carrying current: 2A
  Max. switching voltage: 250 VAC / 220VDC
  Max. switching power: 62.5VA / 30W
• Configurable inputs
• Digital input
  Logical Level Monitoring
• Analog input
  Voltage measurement (0-10V)
  Current measurement (0-20mA)

Antenna

• Connector
  SMA
• Impedance
  50Ω

Other

• Operating temperature range
  -40 - 85°C
• Dimensions
  69 x 100 x 24 mm